Boeing 777-300 Panel Description:
Description: Boeing 777-300 1024x768 re-designed panel based on original FS2000 panel. Primary instruments are arranged according to Boeing 777-300 cockpit layout, with radio and compass integrated in panel. GPS and throttle panels open over PFD and MFD, creating an integrated look. David Claassen
Boeing 777-300 Panel, V2. Description: Top Avionics panel for Boeing 737-NG based on shareware gauges made by Tony D'Ambrosio. Panel for fs2004 made by Marco Spada using photorealistic bitmaps for main panel, pedestal and overhead. The gauges work for ten minutes, then if you want you may register taop avionic gauges at Tony D'Ambrosio's web page following the included instructions. You need also tho download the Nav Data by the same webpage to have the FMC and the Nav Display to work correctly.
Boeing 7E7 Panel. Description: Top Avionics Boeing 7E7 panel for fs2004 based on shareware Realcrt gauges made by Tony D'Ambrosio. Complete with Hud, Pedestal and overhead panel. Uses also Tony D'Ambrosio's new fs2004 FMC that import fs9 flight plans and shows route in Nav Display, LNAV and VNAV included. The panel works for 10 minutes, than if you want you may register it following the istructions in registration.txt. You must download also the Nav Data files directly from T.D'Ambrosio's web page. Panel made by Marco Spada. A freeware version is not included for this panel because standard gauges are not realistic for this plane.
Boeing B-52 Stratofortress Panel. Description: This panel was made for the Boeing B52 Stratofortress aircraft made by Yaetsu Yoshimitsu / Hiroaki Kubota.
Boeing F4B panel. Description: An alternate panel for Paul Clawson's Boeing F3B-4 featuring a bitmap made from a screenshot of the VC. The gauges have been rearranged for ease of use.
Boeing Sonic Cruiser (standard/PRO) Description:
This panel is designed for the new Boeing Sonic Cruiser, but this panel can also be used for other airplanes with 2 engine's. This panel has also support for gpws add-ons, like VCP 2000 and GPWS98 and has internal views. The panel is tested in FS2000 and FS2002 without any problems. Tested screen resolution: 640x480, 800x600, 1024x786 and 1280x1024. I have also included my most recent version of my flightsim.bat. It's a very good tool, to update my panels. I have also included a new Boeing Sonic Cruiser winampskin. By Frank Elfert.
Boeing 777-200 panel for fs2004 made by Marco Spada using a custom bitmap, default and third party gauges.
No additional comments.
Description: Boeing 777-300 1024x768 re-designed panel based on original FS2000 panel. Primary instruments are arranged according to Boeing 777-300 cockpit layout, with radio and compass integrated in panel. GPS and throttle panels open over PFD and MFD, creating an integrated look. David Claassen
Top Avionics panel for Boeing 737-NG based on shareware gauges made by Tony D'Ambrosio. Panel for fs2004 made by Marco Spada using photorealistic bitmaps for main panel, pedestal and overhead. The gauges work for ten minutes, then if you want you may register taop avionic gauges at Tony D'Ambrosio's web page following the included instructions. You need also tho download the Nav Data by the same webpage to have the FMC and the Nav Display to work correctly.
Panel for Dreamliner Boeing 787 for Flight Simulator X only.
This panel was made for the Boeing 7E7 Dreamliner aircraft.
Top Avionics Boeing 7E7 panel for fs2004 based on shareware Realcrt gauges made by Tony D'Ambrosio. Complete with Hud, Pedestal and overhead panel. Uses also Tony D'Ambrosio's new fs2004 FMC that import fs9 flight plans and shows route in Nav Display, LNAV and VNAV included. The panel works for 10 minutes, than if you want you may register it following the istructions in registration.txt. You must download also the Nav Data files directly from T.D'Ambrosio's web page. Panel made by Marco Spada. A freeware version is not included for this panel because standard gauges are not realistic for this plane.
This panel was made for the Boeing B52 Stratofortress aircraft made by Yaetsu Yoshimitsu / Hiroaki Kubota.
An alternate panel for Paul Clawson's Boeing F3B-4 featuring a bitmap made from a screenshot of the VC. The gauges have been rearranged for ease of use.
This panel is designed for the new Boeing Sonic Cruiser, but this panel can also be used for other airplanes with 2 engine's. This panel has also support for gpws add-ons, like VCP 2000 and GPWS98 and has internal views. The panel is tested in FS2000 and FS2002 without any problems. Tested screen resolution: 640x480, 800x600, 1024x786 and 1280x1024. I have also included my most recent version of my flightsim.bat. It's a very good tool, to update my panels. I have also included a new Boeing Sonic Cruiser winampskin. By Frank Elfert.