Sort Downloads by: Title (A\D) Date (A\D) Rating (A\D) Popularity (A\D) Resources currently sorted by: Title (A to Z)
Auch-Lamothe, France Description:
Located in south/west of France, Auch-Lamothe airport is about 39Nm (72Km), head on 280 ° from my favourite airport (LFCL). Auch-Lamothe is in the heart of the Gers department, a country renowned for her beauty and quality of life. managing 20000 flights a years, with a 1500 m paved runway fitted for night flight as well as a 800 m grass runway.In real fly, this airport can give some small difficulties indeed it's important to know that this ground is shaped with a NORTH / SOUTH orientation wich is PERPENDICULAR to the main winds, and that being situated at the bottom of a valley, the wind in height is often invisible. It is not so rare that the wind-sock is hanging, while there is 10 to 15 knots of cross-wind at 100 feet. Runway run off are relatively frequent for this reason. Caution in particular during Autan's wind (east wind) situations on the Toulousian plain. So, do not hesitate to set cross-wind with your favourite FS to know those stress sensations which stimulate blood circulation!...By Patrick Castay.
Auckland International Airport, New Zealand Version 1.0 Description:
This Scenery enhances the default Microsoft scenery with custom made 3d Objects. Terminal Building with gates and night lighting Hangers and Freight Areas General Aviation Area Static Aircraft & Ground Vehicles Airport 2.10,Nova & Nova Gold Textures Required
By Shayne Butler
Australia - Melbourne YMML. Description: Very detailed airport, but where possible built with frame rates in mind. Still this scenery may be heavy going for low power computers. Changing the FS2004 scenery complexity setting to "normal" may help some users. To enjoy the scenery as it was designed, your setting should be "very dense" or higher. Much,much more could of been added to this scenery but to do so would render it unusable. We are aware that the default FS2004 can be a struggle for many computers in use today and this scenery may not suit you, if so treat yourself to an upgrade.
Autogen Conifer Tree Replacement Pack Description:
set of seasonal replacement textures to greatly enhance the quality and realism of the FS2002 auto-gen default conifers. Two sets are included: Standard 512x512 bitmaps, (no framerate hit), and Deluxe 1024x1024 bitmaps,(slight framerate hit), with enhanced resolution for high end users who want the ultimate in realism. Also increases conifer numbers by 4 to 1. Freeware by Ed Truthan
Baghdad City Centre Photo Scenery Description: Baghdad City Centre Photo Scenery Iraq, v1. Based on 2.4m resolution image of Baghdad City centre, February 6, 2002. Image displays in FS2002 at resolution limited by terrain engine. By Neil Cooke. Image courtesy of DigitalGlobe. Version: FS2002/4 Filesize: 5.72 MB Added on: 19-May-2003 Downloads: 1095 HomePage | Rate Resource | Details
Baltimore "photoreal" scenery Description:
BALTIMORE: 486 square miles of scenery in a region around Baltimore, 27 miles by 18 miles.
This scenery replaces the default FS2002 scenery for Baltimore. Some buildings will appear in the water near the city itself. This is because the resolution of the default FS2002 scenery is lower than the resolution of this scenery and Microsoft moved the buildings to sit on their land. This scenery is made from USGS maps which provide data on roads,rivers and land use. Instead of using actual photos, 30 or so textures make up the image based on the map data. Until Microsoft releases more details on how to add scenery, this is almost as good as we're going to get. The only thing which could make this better is the addition of the new water effects. There is also the possibility of increasing the resolution to around 4 metres per pixel. At the moment this scenery is 7.5m/pixel By Andrew McLean
Bamfield Air Harbour. Description: Bamfield is a small harbour on the Pacific Side of Vancouver Island just south of Tofino. The scenery includes a couple of buildings and a dock. An AFCAD files is integrated so the harbour will show up on the flight simulator map and GPS. There are two starting locations and one runway. This is a great place to explore the island from. The real life Air Traffic frequeny is also used for the harbour.
Bangor Intl Airport. Description: Bangor Intl Airport serves Bangor and Penobscot County and is owned by the City Of Bangor. The paved runway extends for 11439 feet. The facility is at an elevation of 192 feet at a distance of about 3 miles from Bangor. Requires ASDv2.1, Nova and Nova Gold Textures. Also requires Traffic Tools and AFCAD2.
Bankstown, NSW, Australia. Description: This version is a rebuild to suit the default FS2004 scenery. Bankstown airport, Australias busiest airports in terms of annual aircraft moments, is situated 22 kilometres south-west of Sydneys CBD. It is now recognized as the centre of the general aviation industry in Australia. Textures required. Airport 2.6, VOD, Nova and Nova Gold.
Located in south/west of France, Auch-Lamothe airport is about 39Nm (72Km), head on 280 ° from my favourite airport (LFCL). Auch-Lamothe is in the heart of the Gers department, a country renowned for her beauty and quality of life. managing 20000 flights a years, with a 1500 m paved runway fitted for night flight as well as a 800 m grass runway.In real fly, this airport can give some small difficulties indeed it's important to know that this ground is shaped with a NORTH / SOUTH orientation wich is PERPENDICULAR to the main winds, and that being situated at the bottom of a valley, the wind in height is often invisible. It is not so rare that the wind-sock is hanging, while there is 10 to 15 knots of cross-wind at 100 feet. Runway run off are relatively frequent for this reason. Caution in particular during Autan's wind (east wind) situations on the Toulousian plain. So, do not hesitate to set cross-wind with your favourite FS to know those stress sensations which stimulate blood circulation!...By Patrick Castay.
This Scenery enhances the default Microsoft scenery with custom made 3d Objects. Terminal Building with gates and night lighting Hangers and Freight Areas General Aviation Area Static Aircraft & Ground Vehicles Airport 2.10,Nova & Nova Gold Textures Required
By Shayne Butler
No additional comments.
Very detailed airport, but where possible built with frame rates in mind. Still this scenery may be heavy going for low power computers. Changing the FS2004 scenery complexity setting to "normal" may help some users. To enjoy the scenery as it was designed, your setting should be "very dense" or higher. Much,much more could of been added to this scenery but to do so would render it unusable. We are aware that the default FS2004 can be a struggle for many computers in use today and this scenery may not suit you, if so treat yourself to an upgrade. 
set of seasonal replacement textures to greatly enhance the quality and realism of the FS2002 auto-gen default conifers. Two sets are included: Standard 512x512 bitmaps, (no framerate hit), and Deluxe 1024x1024 bitmaps,(slight framerate hit), with enhanced resolution for high end users who want the ultimate in realism. Also increases conifer numbers by 4 to 1. Freeware by Ed Truthan
BALTIMORE: 486 square miles of scenery in a region around Baltimore, 27 miles by 18 miles.
This scenery replaces the default FS2002 scenery for Baltimore. Some buildings will appear in the water near the city itself. This is because the resolution of the default FS2002 scenery is lower than the resolution of this scenery and Microsoft moved the buildings to sit on their land. This scenery is made from USGS maps which provide data on roads,rivers and land use. Instead of using actual photos, 30 or so textures make up the image based on the map data. Until Microsoft releases more details on how to add scenery, this is almost as good as we're going to get. The only thing which could make this better is the addition of the new water effects. There is also the possibility of increasing the resolution to around 4 metres per pixel. At the moment this scenery is 7.5m/pixel By Andrew McLean
Bamfield is a small harbour on the Pacific Side of Vancouver Island just south of Tofino. The scenery includes a couple of buildings and a dock. An AFCAD files is integrated so the harbour will show up on the flight simulator map and GPS. There are two starting locations and one runway. This is a great place to explore the island from. The real life Air Traffic frequeny is also used for the harbour.
Bangor Intl Airport serves Bangor and Penobscot County and is owned by the City Of Bangor. The paved runway extends for 11439 feet. The facility is at an elevation of 192 feet at a distance of about 3 miles from Bangor. Requires ASDv2.1, Nova and Nova Gold Textures. Also requires Traffic Tools and AFCAD2.
This version is a rebuild to suit the default FS2004 scenery.